gear metering pumps for food processing delivery
|Packaging:||Standard Exporting Carton or OEM Packing|
|Place of Origin:||china,jiangsu|
Model No.: M3.00S72BL170W
1.400 Mesh filter shall be installed at the inlet of gear pump.
2.Before using, squeeze in a small amount of medium to lubricate the gear from the gear pump inlet.
Product Model Selection Instruction：
"M" means by magnetic drive
Pump revolution, Unit: ml/rev, note 1 for details
Pump body materials, note 2 details
Pump head spec, Unit: mm, note 3
Motor Type, Note 4
1. Pump output volume: 0.07,0.15,0.3,0.6,0.9,1.5,3.0,6.,12.0 (Unit: ml/rev)
2."S" means pump body material is 316L, gear and shaft sleeve are PEEK, seal with PTFE, the rest others are 316L.
"T" means pump body material is 316L, gear and shaft are Tungsten steel, shaft sleeve is PEEK, seal with PTFE, the rest others are 316L.
"P" means pump body material is PPS, gear materail and shaft sleeve are PEEK, seal with FFKM, the rest others are Hastelloy.
"H" means the pump body materials is Hastelloy, the gear and shaft sleeve is PEEK, the seal materials is PTFE, the rest of the pump flow material is Hastelloy, the appearance and size is same as 316L pump, details product parameters refer to 316L pump head.
3. Pump head range: 57, 72, 88. Model 57 has 0.07,0.15,0.3,0.6,0.9,1.5 ml/rev;Model 72 has 1.5,3.0 ml/rev;
Model 88 has 3.0,6.0,12.0 ml/rev.
4.Motor:HS: Stepper Motor; BL: External drive DC brushless; BLa:Built-in drive DC brushless; BLb:Built-in drive DC brushless (potentiometer)DC:Brush motor; Y:Common asynchronous motor; YB:Explosion proof asynchronous motor; SM:Servo motor YP: General asynchronous frequency conversion YBP: Explosion proof asynchronous frequency conversion, SMP: Servo frequency conversion.
Product Model : M3.00S72BL170W
Product Parameters: Pump Model Motor Type L1（mm） L2（mm） Pressure（bar) Weight(kg) Rated Current（A） Imp.&Exp. Size Flow（L/H） M1.50S72 BL170W 187.9 49.1 8 2.62 9.5 G1/4 27～405 M3.00S72 204.9 66.1 4 2.75 G3/8 54～810 Pump Head Parameter Motor Parameter Motor wiring Continuous work pressure 0.8MPa Rated Power 24V Red +24V Yellow (Thick) R(U) Phase Fluid Viscosity 0.2-3000cps Revolution 500-4500rpm Black 0 Green (Thick) S(V) Phase Ambient Temperature -40℃-110℃(If the temperature of the conveying medium is over 70 °C, please make a special request.) Slot and Pole No. 12 Slot & 8 Pole Yellow（Thin） HALL A(U) Blue (Thick) T(W) Phase Static sealing PTFE Hall mechanical angle 120° Green （Thin） HALL B(V) Pump Body material 316L Working system Continuous or intermittent operation (can be started frequently) Blue（Thin） HALL C(W) Gear Materiall PEEK and shaft 316L
Pump Head Parameter
Continuous work pressure
-40℃-110℃(If the temperature of the conveying medium is over 70 °C, please make a special request.)
Slot and Pole No.
12 Slot & 8 Pole
Hall mechanical angle
Pump Body material
Continuous or intermittent operation (can be started frequently)
PEEK and shaft 316L
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.
No pulse, high precision.
the external gear design makes the pump flow relatively unaffected by the system pressure,and the flow output has no pulsation, which can accurately measure the flow, and has strong repeatability.
Gear transmission can ensure constant instantaneous transmission ratio.
no packing seal or mechanical seal, no wearing parts, using magnetic drive, static seal,truly achieve zero leakage.
304 / 316L, Hastelloy and engineering plastics can be selected as pump body materials,which can be used in most chemical media.
Efficient and convenient, long service life.
adopt the way of motor direct drive, reduce the vulnerable parts. High efficiency and energy saving, simple maintenance, low installation cost, long service life.
suitable for high differential pressure, high system pressure and wide range of medium viscosity.
long service life.
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Diversified drive mode.
magnetic drive gear metering pump can be directly connected with DC brushless motor,2-pole and 4-pole AC motor without reducer. The flow control of the pump can be realized by the controller of AC, DC, brushless DC and other motors. We can provide a variety of standard driving methods to meet the needs of customers.
A wide range of applications.
magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
All kinds of liquids, high precision fluid transportation, high repeatability, continuous small flow without pulsation.
It is used in aviation equipment, aircraft, spacecraft, chemical laboratory, chemical reagent adding, film manufacturing, pharmaceutical machine equipment, various lasers, micro cooling device of sighting instrument,tobacco flavoring adding, inkjet printing machine manufacturing, inkjet printer manufacturing, high-performance color printing machine and other industries.
Industrial machinery and equipment
Food and cosmetics
Food and Beverage filling
Filling of perfume cosmetics
Suzhou Macxi Fluid Technology Co., Ltd. was established in 2014. Since the establishment of the company, we adhere to the concept of innovation and forge ahead. Our company is mainly engaged in the development, production and sales of pumps. Main magnetic drive micro gear pump, with an annual output of 100000 gear pump production capacity. The company has been committed to the optimization of product structure, improvement of service life and customization according to customer requirements, so as to improve the competitiveness of products for supporting manufacturers. We are looking forward to providing more high-quality products and services for more domestic and foreign users.
- Company Name: Suzhou Macxi Fluid Technology Co.,Ltd.
- Representative: chenjiabing
- Product/Service: Gear Pump , Micro Gear Pump , Micro dosing Pump , Inkjet Pump , Magnet Gear Pump , External Gear Pump
- Capital (Million US $): 5000000RMB
- Year Established: 2014
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: CN,Jiangsu,Suzhou,No. 1, Changsheng Road, Zhitang Town, Changshu
- Contact Person: Mr. Bruce Tang
- Tel: 86-512-52811985
Premium Related Products